R5-Lecar L4-1397cc 1.4L (1983)
9.
Install the clutch plate and check clearance again. Tighten the new nut to 34-41 N-m (25-30 ft. lbs.) if clearance is correct.
2.
COMPRESSOR SHAFT SEAL REPLACEMENT
Removal
1.
Remove the compressor clutch as outlined in Compressor Clutch Service.
2.
Remove the belt ring with snap ring pliers. Insert the pliers into the two holes in the metal ring retainer and lift out the ring.
FIGURE 8
3.
Remove the clutch shims (Fig. 8). Use O-ring hook J-9553-01 and a small screwdriver to prevent the shims from binding on the shaft during
removal.
4.
Remove the shaft seal seat snap ring (Fig. 8).
FIGURE 9
5.
Remove the shaft seal seat using tool J-9393-2 (Fig. 9).
