9-2X F4-2.0L Turbo (2005)
(1) Brake tester
Operate the brake tester.
Perform the ABS sequence control.
Hydraulic unit begins to work; and check the following working sequence.
The FL side performs decompression, holding and compression in sequence, and subsequently the FR side repeats the cycle.
The RR side performs decompression, holding and compression in sequence, and subsequently the RL side repeats the cycle.
Read values indicated on the brake tester and check if the fluctuation of values, while decompressed and compressed, meet the standard values.
After checking, also check if any irregular brake pedal tightness is felt.
