9-2X F4-2.0L Turbo (2005)
c. Install the rocker cover on cylinder head. Ensure the gasket is properly positioned during installation.
CAUTION: Use a new rocker cover gasket.
d. Tighten the rocker cover tightening bolts in alphabetical sequence shown in the figure, and then tighten to specified torque.
Tightening torque: 6.4 Nm (0.65 kgf-m, 4.7 ft. lbs.)
5. Install the oil pipe.
NOTE: Installing location of the union screw varies depending on with or without filter. Be careful of this.
Tightening torque: 29 Nm (3.0 kgf-m, 21.4 ft. lbs.)
