9-2X F4-2.0L Turbo (2005)
12. If necessary, adjust the valve clearance.
13. Measure the valve clearance in #3, #2 and #4 cylinder in the same measurement procedure as #1 cylinder.
NOTE:
^
Be sure to set the cylinder pistons to their respective top dead centers on compression stroke before measuring valve clearances.
^
By rotating the crank pulley clockwise every 180° from the state that #1 cylinder piston is on the top dead center of compression stroke, #3, #2
and #4 cylinder pistons come to the top dead center of compression stroke in this order.
14. After inspection, install the related parts in the reverse order of removal.
