9-2X F4-2.0L Turbo (2005)
7. Tighten the nuts which install the front cushion rubber onto front crossmember.
Tightening torque: 83 Nm (8.5 kgf-m, 61 ft. lbs.)
8. Install the front exhaust pipe assembly.
9. Install the under cover.
10. Lower the vehicle.
CAUTION: When lowering the vehicle, lower the lifting device and wire rope together.
11. Remove the lifting device and steel cables.
12. Install the pitching stopper.
Tightening torque:
T1: 50 Nm (5.1 kgf-m, 36.9 ft. lbs.)
T2: 58 Nm (5.9 kgf-m, 42.8 ft. lbs.)
13. Install the radiator upper brackets.
