9-2X F4-2.0L Turbo (2005)
5. Connect the connector to rear oxygen sensor.
6. Secure the clip on crossmember.
7. Tighten the bolt which holds the center exhaust pipe bracket to transmission.
^
Tightening torque: 30 Nm (3.1 kgf-m, 22.4 ft. lbs.)
5. Connect the connector to rear oxygen sensor.
6. Secure the clip on crossmember.
7. Tighten the bolt which holds the center exhaust pipe bracket to transmission.
^
Tightening torque: 30 Nm (3.1 kgf-m, 22.4 ft. lbs.)