9-2X F4-2.0L Turbo (2005)
Evaporator Case: Service and Repair
Heater and Cooling Unit
Heater And Cooling Unit
Removal
Disconnect the ground cable from battery.
Using the refrigerant recovery system, discharge refrigerant.
Drain LLC from the radiator.
Remove the bolt securing expansion valve and pipe in engine compartment.Release the heater hose clamps in engine compartment to remove the hoses.
Remove the instrument panel.
Remove the support beam.
Remove the blower motor unit assembly.
Disconnect the servo motor connectors.
Loosen the bolt and nuts to remove the heater and cooling unit.
