9-2X F4-2.0L Turbo (2005)
Brake Light Switch: Service and Repair
Stop Light Switch
Removal
Disconnect the ground cable from battery.
Disconnect the stop light switch connector.
Loosen nuts, and unscrew stop light switch to remove.
(1) Stop light switch
Installation
Screw the stop light switch onto a bracket and secure it temporarily with a nut.
Adjust the stop light switch position, and then tighten the nut.
Tightening torque: 8 Nm (0.8 kgf-m, 5.8 ft. lbs.)
