9-2X F4-2.0L Turbo (2005)
Fuel Return Line: Service and Repair
Fuel Delivery, Return and Evaporation Lines
REMOVAL
Set the vehicle on a lift.
Release the fuel pressure.
Open the fuel filler flap lid and remove the fuel filler cap.
Remove the floor mat.
Remove the fuel delivery pipes and hoses, fuel return pipes and hoses, evaporation pipes and hoses.
In engine compartment, detach the fuel delivery hoses, return hoses and evaporation hose.
Separate the quick connectors of fuel delivery line and return line by pushing the ST to the direction of arrow.
ST 32005086 CONNECTOR REMOVER
Remove the clip, and separate the evaporation hose from pipe.
WARNING:
-
Be careful not to spill fuel.
-
Catch the fuel from hoses using a container or cloth.
Lift up the vehicle.
Separate the quick connector on fuel line.
Clean the pipe and connector, if they are covered with dust.
To prevent from damaging or entering foreign matter, wrap the pipes and connectors with plastic bag, etc.
