9-2X F4-2.0L Turbo (2005)
Side Air Bag: Service and Repair
Side Airbag Module
Removal
IMPORTANT: Before working on the airbag module, refer to the "CAUTION" in Airbag Systems/Service Precautions.
NOTE: Remove the passenger's side by referring to driver's side.
Turn the ignition switch to OFF.
Disconnect the ground cable from battery, and wait for at least 20 seconds before starting work.
Remove the front seats.
Remove the clip, and then remove the side airbag harness from slide rail IN (A) and reverse side seat cushion assembly.
Remove the backrest cover.
Remove the side airbag harness from backrest frame assembly.