9-2X F4-2.0L Turbo (2005)
Repairs and Inspections Required After a Collision: Service and Repair
Air Bag System
INSPECTION
If the vehicle is involved in a collision, even if it is a slight collision, be sure to check the following system parts.
DRIVER'S AIRBAG MODULE
Check for the following, and replace damaged parts with new parts.
-
Airbag module is cracked or deformed.
-
Harness and/or connector is cracked, deformed or open. Lead wire is exposed.
-
The module surface is fouled with grease, oil, water or cleaning solvent.
When installing a new driver’s airbag module, check the following, and replace the damaged parts with new ones.
-
The steering wheel is in the way, making it difficult to install the airbag module.
-
The clearance between the driver’s airbag module and steering wheel is not constant.
-
The steering wheel deformation in axial and radial directions exceed limits.
Specifications:
Height deflection A: less than 6 mm (0.24 in)
O.D. deflection L: Less than 17 mm (0.67 in)
PASSENGER'S AIRBAG MODULE
Check for the following, and replace damaged parts with new parts.
-
Airbag module is cracked or deformed.
-
Harness and/or connector is cracked, deformed or open. Lead wire is exposed.
-
Mounting bracket is cracked or deformed.
SIDE AIRBAG MODULE
Check for the following, and replace damaged parts with new parts.
-
Front seat, airbag module and mounting bracket are damaged or deformed.
-
Harness and/or connector is cracked, deformed or open. Lead wire is exposed.
AIRBAG CONTROL MODULE
Check for the following, and replace damaged parts with new parts.
-
Control module is cracked or deformed.
-
Mounting bracket is cracked or deformed.
-
Connector is scratched, cracked or deformed.
-
Airbag is deployed.
-
Side airbag is deployed.
FRONT SUB SENSOR