9-2X F4-2.0L Turbo (2005)
Seat Belt: Description and Operation
CAUTION
-
Before starting, turn the ignition switch to OFF, disconnect the battery ground cable and wait for 20 seconds or more.
-
The pretensioner system has a backup power source. The pretensioner might deploy if you do not wait for 20 seconds or more before starting
work.
-
Do not drop or apply any impact to the pretensioner.
-
If oil, grease, or water gets on the pretensioner, wipe it off immediately with a dry cloth.
-
Do not expose the pretensioner to high temperature or flame.
-
Do not allow current to flow through or voltage to reach the pretensioner. Do not use a circuit tester to check resistance of the pretensioner.
-
Do not disassemble or attempt to repair the pretensioner. If it is dented, cracked, or deformed, replace it with a new one.
-
Do not use the airbag or pretensioner parts from other vehicles. Always replace parts with new parts.
-
When handling a seat belt with a deployed pretensioner, wear gloves and goggles. Wash your hands afterwards.
-
Do not re-use a seat belt with a deployed pretensioner again.
-
If the material gets in your eyes or on your skin during deployment, wash it away with clean water, and then consult a doctor.