9-2X F4-2.0L Turbo (2005)
Lateral Accelerometer: Service and Repair
G Sensor
REMOVAL
Disconnect the ground cable from battery.
Remove the console cover.
Disconnect the connector from G sensor.
Remove the G sensor from body.
Important:
^
Do not drop or bump the G sensor.
^
G sensor and the bracket are integrated into one unit. Therefore, do not disassemble it.
INSTALLATION
Install in the reverse order of removal.
Important: Do not drop or bump the G sensor.
Tightening torque: 18 Nm (1.8 kgf-m, 13.0 ft. lbs.)