9-2X F4-2.0L Turbo (2005)
Pass the harness assembly through the hole in the transmission case.
Connect the harness connectors.
Connect the connectors of same color, and secure the connectors to valve body using clips. (Saab 9-2X 2.0T Aero)
Tightening torque (Transmission ground cable and ATF temperature sensor): 8 Nm (0.8 (kgf-m, 5.8 ft. lbs.)
(A) Lock-up duty solenoid (Blue)
(B) Low clutch timing solenoid (Gray)
(C) Line pressure duty solenoid (Red)
(D) Shift solenoid 2 (Yellow)
(E) Shift solenoid 1 (Green)
(F) 2-4 brake timing solenoid (Black)
(G) 2-4 brake duty solenoid (Red)
(H) ATF temperature sensor
(I) Transfer duty solenoid (Brown)
(J) Transmission ground
Connect the harness connector and transmission ground. (Saab 9-2X 2.5i Linear)
Tightening torque: 8 Nm (0.8 (kgf-m, 5.8 ft. lbs.)
(A) Transmission ground
(B) Harness connector
