9-2X F4-2.0L Turbo (2005)
Power Steering Pump: Service and Repair
Oil Pump
REMOVAL
Disconnect the ground cable from battery.
Remove the pulley belt cover.
Loosen the belt tension adjusting bolt and generator securing bolt, and then remove the power steering pump V-belt.
Disconnect the connector from power steering pump switch.
Disconnect the pipe C and suction hose from oil pump.
Important:
^
Do not allow fluid from the hose end to come into contact with pulley belt.
^
To prevent foreign matter from entering the hose, cover the open ends of them with a clean cloth.
Remove the bolts which install the power steering pump bracket.