9-2X F4-2.0L Turbo (2005)
(A) Boot band
(B) Less than 2 mm (0.08 inch)
Fix the boot end with clip (small).
(1) Clip
After installing, check the boot end is positioned into groove on tie-rod.
If the tie-rod end was removed, screw in the lock nut and tie-rod end to screwed portion of tie-rod, and then tighten the lock nut temporarily in a
position as shown in the figure.
Installed tie-rod length: L
Sedan: 25 mm (0.98 inch)
Wagon: 15 mm (0.59 inch)