9-2X F4-2.0L Turbo (2005)
Front Cross-Member: Service and Repair
Jack-Up Plate
Jack-Up Plate
REMOVAL
Set the vehicle on a lift.
Lift-up the vehicle.
Remove the under cover.
Remove the jack-up plate.
INSTALLATION
Install in the reverse order of removal.
Tightening torque:
Both end of Jack-up plate to crossmember: 30 Nm (3.1 kgf-m, 22 ft. lbs.)
Jack-up plate to crossmember: 70 Nm (7.1 kgf-m, 52 ft. lbs.)
INSPECTION
Check the jack-up plate for wear, damage and cracks, and correct or replace if defective.