9-2X F4-2.0L Turbo (2005)
T6: 7 Nm (0.7 kgf-m, 5.1 ft. lbs.)
Install the transmission rear crossmember.
Tighten the bolts.
Tightening torque:
T1: 35 Nm (3.6 kgf-m, 26 ft. lbs.)
T2: 70 Nm (7.1 kgf-m, 51 ft. lbs.)
Remove the transmission jack.
Install the propeller shaft. Install center and rear exhaust pipes, and muffler. Connect the transmission harness connector.
Install the pitching stopper.
Tightening torque:
T1: 50 Nm (5.1 kgf-m, 37 ft. lbs.)
T2: 58 Nm (5.9 kgf-m, 43 ft. lbs.)