9-2X F4-2.0L Turbo (2005)
Shifter A/T: Service Precautions
CAUTION
^
Wear work clothing, including a cap, protective goggles, and protective shoes during operation.
^
Remove contamination including dirt and corrosion before removal, installation or disassembly.
^
Keep the disassembled parts in order and protect them from dust and dirt.
^
Before removal, installation or disassembly, be sure to clarify the failure. Avoid unnecessary removal, installation, disassembly, and
replacement.
^
Use SUBARU genuine grease etc. or the equivalent. Do not mix grease etc. with that of another grade or from other manufacturers.
^
Be sure to tighten fasteners including bolts and nuts to the specified torque.
^
Place shop jacks or rigid racks at the specified points.
^
Apply grease onto sliding or revolution surfaces before installation.
^
Before installing O-rings or snap rings, apply sufficient amount of grease to avoid damage and deformation.
^
Before securing a part on a vise, place cushioning material such as wood blocks, aluminum plate, or shop cloth between the part and the vise.
^
Before disconnecting electrical connectors, be sure to disconnect the ground cable from battery.