9-2X F4-2.0L Turbo (2005)
Install the air intake chamber. (Saab 9-2X 2.5i Linear)
Remove intercooler. (Saab 9-2X 2.0T Aero)
TRANSMISSION REAR CROSSMEMBER AND REAR CUSHION RUBBER
Install the rear cushion rubber.
Tightening torque: 39 Nm (4.0 kgf-m, 29 ft. lbs.)
Install the crossmember.
Tightening torque:
T1: 35 Nm (3.6 kgf-m, 26 ft. lbs.)
T2: 70 Nm (7.1 kgf-m, 51 ft. lbs.)
Remove the transmission jack.
Install the heat shield cover. (If equipped)
Install the front, center, rear exhaust pipes and the muffler. (Saab 9-2X 2.5i Linear)
Install center and rear exhaust pipes, and muffler. (Saab 9-2X 2.0T Aero)
