saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Valve Body, A/T|Testing and Inspection|Page 3540 > < Valve Body, A/T|Testing and Inspection|Page 3538
Page 5
background image

Apply proper amount of liquid gasket to the entire oil pan mating surface.
Liquid gasket: THREE BOND 1217B (Part No. 32005004)

Apply liquid gasket fully to three holes other than screw holes on transmission case.
Liquid gasket: THREE BOND 1217B (Part No. 32005004)

Install the oil pan by equally tightening the bolts.
Tightening torque: 5 Nm (0.5 (kgf-m, 3.6 ft. lbs.) 
Pour ATF from the oil charge pipe.
Recommended fluid: Dexron III
Fluid capacity: fill the same amount of fluid drained from drain plug hole.
Check the level of ATF.

Saab 9-2X 2.5i Linear 
Check the control valve body for dirt and dust.
Temporarily install the control valve body to transmission.
Install the oil cooler pipe.
Tightening torque: 8 Nm (0.8 (kgf-m, 5.8 ft. lbs.) 

Valve Body, A/T|Testing and Inspection|Page 3540 > < Valve Body, A/T|Testing and Inspection|Page 3538