9-2X F4-2.0L Turbo (2005)
(A) Steel ball
(B) Spring
Align the hole in side plate with the hole in separator plate, and then install support plate and upper separator plate to middle valve body.
Tightening torque: 8 Nm (0.8 kgf-m, 5.8 ft. lbs.)
(A) Upper separator plate
(B) Side plate
Insert six steel balls in their proper positions to middle valve body.
(A) Steel ball
(B) Middle valve body
Install three filters to lower valve body.
Note: Pay attention to the location of filters.
(A) Strainer
(B) Lower valve body
