9-2X F4-2.0L Turbo (2005)
Install the lower separate plate to lower valve body.
(A) Lower separator plate
(B) Lower valve body
Temporarily assemble the valve body.
Note: Be careful not to drop the middle valve body and upper body interior steel ball, or the lower body filter.
Tighten the bolts and nuts.
Note: Install the bolts (D) from upper valve body side.
Tightening torque: 8 Nm (0.8 kgf-m, 5.8 ft. lbs.)
Bolt length mm (in)
(A) 40 (1.57)
(B) 62 (2.44)
(C) 73 (2.87)
(D) 79 (3.11)
Install the sensor, solenoids and duty solenoids to specified positions.