9-2X F4-2.0L Turbo (2005)
Clutch Release Fork: Service and Repair
Release Bearing and Lever
REMOVAL
EXCEPT STI MODEL
1. Remove the transmission assembly from vehicle body.
2. Remove the two clips from release lever and remove the release bearing. (Non-turbo model)
CAUTION:
Be careful not to deform clips.
3. Remove the release bearing from release lever. (Turbo model)
4. Remove the dust cover.
5. Remove the lever spring from pivot with a screwdriver by accessing it through clutch housing release lever hole. Then remove the release lever.
STI MODEL
1. Remove the transmission assembly from vehicle body.
2. Remove the release lever from transmission.
3. Put the release bearing in engine side.
4. Remove the release bearing from the clutch cover using flat-type screwdriver.