9-2X F4-2.0L Turbo (2005)
Move the gear select cable so that extension bolts can be removed.
Remove the bolts.
Remove the extension case.
Note: Use a container to catch oil flowing from extension.
Disconnect the transfer duty solenoid connector.
Remove the transfer duty solenoid and transfer valve body.
(A) Transfer valve body
(B) Transfer duty solenoid connector
(C) Transfer duty solenoid
INSTALLATION
Install the transfer duty solenoid and transfer valve body. Install the transfer duty solenoid and transfer valve body. Tightening torque: T6: 8 Nm (0.8
kgf-m, 5.8 ft. lbs.) Connect the transfer duty solenoid connector.
