9-2X F4-2.5L (2006)
Brake Pad: Service and Repair
Front Brake Pad
Front Brake Pad
REMOVAL
15 INCH TYPE & 16 INCH TYPE
Set the vehicle on a lift.
Loosen the wheel nuts.
Lift-up the vehicle, and then remove the front wheel.
Remove the lower caliper bolt.
Raise the caliper body upward and support it.
Note: Do not disconnect the brake hose from caliper body.
Remove the pad.
Note: If the brake pad is difficult to remove, proceed as follows:
Remove the caliper body from support.
Remove the support.
Place a support in a vise between wooden blocks.
(1) Support
(2) Wooden blocks
Attach a rod of less than 12 mm (0.47 inch) dia. to the shaded area of brake pad, and strike the rod with a hammer to drive brake pad out of place.