9-2X F4-2.5L (2006)
(1) Tone wheel
(2) ABS wheel speed sensor
(3) Sensor gap
OUTPUT VOLTAGE
Output voltage can be checked by the following method. Install the resistor and condenser, then rotate the wheel about 2.75 km/h (2 MPH) or
equivalent.
Output voltage specification: 0.12 - 1 Volts (at 20 Hz)
Note: Regarding terminal No., please refer to item 1. ABS WHEEL SPEED SENSOR.
(1) Oscilloscope
(2) Terminal
ADJUSTMENT
Adjust the gap using spacer (Part No. 32009555).
