9-2X F4-2.5L (2006)
^ Set the ST in the position shown in the figure to install the intake valve rocker assembly.
ST 18354AA000 VALVE ROCKER HOLDER
2. Tighten the bolts (a) through (h) to specified torque.
Tightening torque: 25 Nm (2.5 kgf-m, 18.4 ft. lbs.)
3. Tighten the bolts (i) through (j) to specified torque.
Tightening torque: 8 Nm (0.8 kgf-m, 5.9 ft. lbs.)
4. Using ST, rotate the spring stopper in the arrow direction to secure it to adjuster pin.
ST 18258AA000 SPRING INSTALLER
2. Adjust the valve clearance.