9-2X F4-2.5L (2006)
Exhaust Pipe: Service and Repair
Front Exhaust Pipe
Front Exhaust Pipe
Removal
1. Disconnect the ground cable from battery.
2. Disconnect the front oxygen (A/F) sensor connector (A) and rear oxygen sensor connector (B).
3. Lift-up the vehicle.
4. Separate the front and center exhaust pipe assembly and rear exhaust pipe.
CAUTION: Be careful, the exhaust pipe is hot.
5. Remove the under cover.
6. Remove the nuts which hold the front exhaust pipe onto cylinder heads.
CAUTION: Be careful not to pull down the front and center exhaust pipe assembly.
7. Remove the bolt which installs the front and center exhaust pipe assembly to hanger bracket.
8. Remove the front and center exhaust pipe assembly from vehicle.