9-2X F4-2.5L (2006)
Rear Wheel Toe-In
Inspection
Toe-in: 0 ± 3 mm (0 ± 0.12 inch) (tolerance)
For rear toe-in inspection procedure, refer to FRONT WHEEL TOE-IN procedure.
Adjustment
Loosen the self-locking nut on inner side of link rear.
NOTE: When loosening or tightening the adjusting bolt, hold the bolt head and turn self-locking nut.
(1) Adjusting bolt
(2) Link rear
Turn the adjusting bolt head until toe-in is at the specification.
Toe-in: 0 ± 2 mm (0 ± 0.08 inch) (adjustment standard)
