9-2X F4-2.5L (2006)
Fluid - A/T: Removal and Replacement
A/T Fluid Replacement
Automatic Transmission Fluid
REPLACEMENT
1. Lift-up the vehicle.
2. Drain the ATF completely.
3. Check the ATF for condition.
CAUTION:
Directly after the vehicle has been running, the ATF is hot. Therefore, be careful not to burn yourself.
4. Replace with a new gasket, and then tighten the ATF drain plug.
5. Lower the vehicle.
6. Pour ATF through the oil charge pipe.
Recommended fluid:
Fluid capacity:
Fill the same amount of ATF drained from drain plug hole.
Capacity when transmission is overhauled:
9.3 - 9.6 liters (9.8 - 10.1 US quarts, 8.2 - 8.4 Imp quarts)
7. Check the level and leaks of ATF.
Differential Fluid Replacement
Differential Gear Oil
REPLACEMENT
1. Lift-up the vehicle.
2. Remove the differential gear oil drain plug using TORX T70, and then drain the differential gear oil completely.
CAUTION:
^
Directly after the vehicle has been running, the differential gear oil is hot. Therefore, be careful not to burn yourself.
^
Be careful not to spill the differential gear oil on exhaust pipe to prevent it from emitting smoke or fire. When the differential gear oil
is spilled on exhaust pipe, wipe it away completely.
3. Replace the gasket with a new one, and then tighten the differential gear oil drain plug using TORX T70.
Tightening torque:
44 Nm (4.5 kgf-m, 32.5 ft. lbs.) (Aluminum gasket)
70 Nm (7.1 kgf-m, 51.6 ft. lbs.) (Copper gasket)
