9-2X F4-2.5L (2006)
Symbol "o - o" indicates that continuity exists between two points or terminals. For example, when a switch position is at "3", continuity exists among
terminals 1, 3 and 6, as shown in table below.
HOW TO DETERMINE AN OPEN CIRCUIT
WITH VOLTMETER:
An open circuit is determined by measuring the voltage between respective connectors and ground using a voltmeter, starting with the connector closest
to power supply. The power supply must be turned ON so that current flows in the circuit. If voltage is not present between a particular connector and
ground, the circuit between that connector and previous connector is open.
