9-2X F4-2.5L (2006)
Remove the side airbag module (A) from backrest frame assembly.
Installation
IMPORTANT: Before working on the airbag module, refer to the "CAUTION" in Airbag Systems/Service Precautions.
Ensure there are no foreign particles on side airbag module.
Install the side airbag module (A) to backrest frame assembly.
Tightening torque: 5.9 Nm (0.59 kgf-m, 4.4 ft-lb)
Install the side airbag harness to backrest frame assembly.
NOTE: Secure the harness to its original position of seat.
