saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Air Bag Systems > < System Relay, HVAC|Locations|Page 4416
Page 1
background image

Repairs and Inspections Required After a Collision: Service and Repair

Inspection

Check the following, and then replace with new parts if necessary

-

Center pillar lower garnish is discolored or cracked

-

Wire harness and/or connector is damaged.

Front Seat Belts

OUTER SEAT BELT ASSEMBLY
-

Pretensioner is cracked or deformed.

-

Seat belt is slackened, bent, or frayed. Seat belt is abnormally wound or extended.

INNER SEAT BELT ASSEMBLY
-

Inner seat belt assembly is deformed or damaged.

-

Seat belt buckle is engaged improperly.

Rear Seat Belts

OUTER SEAT BELT RH ASSEMBLY AND LH ASSEMBLY
-

Seat belt is slackened, bent, or frayed. Seat belt is abnormally wound or extended.

SHOULDER SEAT BELT CTR ASSEMBLY
-

Seat belt is slackened, bent, or frayed. Seat belt is abnormally wound or extended.

CENTER SEAT BELT RH ASSEMBLY AND LH ASSEMBLY
-

Inner belt is deformed or damaged.

-

Seat belt buckle is engaged improperly.

Air Bag Systems > < System Relay, HVAC|Locations|Page 4416