9-2X F4-2.5L (2006)
WITH OHMMETER:
Disconnect all connectors affected, and check the continuity in wiring between adjacent connectors. When the ohmmeter indicates "infinite", the wiring
is open.
HOW TO DETERMINE A SHORT CIRCUIT
WITH TEST LIGHT:
Connect a test light (rated at approx. 3 watts) in place of the blown fuse and allow current to flow through the circuit. Disconnect one connector at a time
from the circuit, starting with the one located farthest from power supply. If the test light goes out when a connector is disconnected, the wiring between
that connector and next connector (farther from the power supply) is shorted.
