9-2X F4-2.5L (2006)
Wheel Bearing: Testing and Inspection
Front Wheel Bearing Inspection
FRONT WHEEL BEARING INSPECTION
NOTE: Inspect the condition of front wheel bearing grease.
-
Jack-up the front of vehicle.
-
While holding the front wheel by hand, swing it in and out to check bearing free play.
-
Loosen the wheel nuts and remove front wheel.
-
If bearing free play exists in step 2) above, attach a dial gauge to the hub and measure axial displacement in axial direction.
Service limit:
Straight-ahead position within 0.05 mm (0.0020 inch)
-
Remove the bolts and self-locking nuts, and extract transverse link from front crossmember.
-
Remove the PTJ of front drive shaft from transmission.
-
While supporting the front drive shaft horizontally with one hand, turn the hub with the other to check for noise or binding.
-
If the hub is noisy or binds, disassemble the front axle and check condition of oil seals, bearing, etc.