9-2X F4-2.5L (2006)
4. Remove intercooler. (Turbo model)
TRANSMISSION REAR CROSSMEMBER AND REAR CUSHION RUBBER
1. Install the rear cushion rubber.
Tightening torque:
39 Nm (4.0 kgf-m, 29 ft. lbs.)
2. Install the crossmember.
3. Remove the transmission jack.
4. Install the front, center, rear exhaust pipes and the muffler. (Non-turbo model)
5. Install center and rear exhaust pipes, and muffler. (Turbo model)
INSPECTION
Repair or replace parts if the results of the inspection below are not satisfactory.
PITCHING STOPPER
Make sure that the pitching stopper is not bent or damaged. Make sure that the rubber is not stiff, cracked, or otherwise damaged.
TRANSMISSION REAR CROSSMEMBER AND REAR CUSHION RUBBER
Make sure that the crossmember is not bent or damaged. Make sure that the cushion rubber is not stiff, cracked, or otherwise damaged.
