saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

ABOUT US
Checking For Lateral Run-Out and Variation In Thickness, Front Wheels|Page 9294 > < Checking For Lateral Run-Out and Variation In Thickness, Front Wheels|Page 9292

9-3 (9440) L4-2.0L Turbo (2007)

Page 5
background image

9. Rotate the disc and read the gauges. Note:  the runout (A) and variation in thickness (B).

10. Check that the readings are within specified intervals, see Brakes - foot brake system - Technical data - Brake discs.
11. Remove the dial gauges, brake disc measuring tool and wheel studs with washers.
12. If runout and thickness variation exceeds specified tolerances, the discs must be machined or replaced. see Brake disc, front.
13. Fit the brake caliper. Secure the bolts with 74 96 268 Thread locking adhesive.

Tightening torque: 210 Nm + 30° (155 1bf ft + 30°)

Checking For Lateral Run-Out and Variation In Thickness, Front Wheels|Page 9294 > < Checking For Lateral Run-Out and Variation In Thickness, Front Wheels|Page 9292