9-3 (9440) L4-2.0L Turbo (2007)
/l4-2.0l_turbo/Page-2365003.png)
10. Remove the locking bolt from the brake fluid reservoir (B) and detach the reservoir from the cylinder.
11. Remove the level sensor from the brake fluid reservoir.
To fit
Important: The EHPS system must not be run dry. Do not reuse drained fluid. Fill the hydraulic system with special fluid.
1. Fit the level sensor to the brake fluid reservoir.
2. Fit the brake fluid reservoir (B) onto the master cylinder and screw in the locking screw.
