9-3 (9440) L4-2.0L Turbo (2007)
Radiator: Service and Repair
Radiator, Drain Cock and Guide Pin
Radiator, Drain Cock And Guide Pin
1. Identify the type of plastic. See Plastic codes, temperature and welding wire or Plastic code table.
2. Select the correct welding wire and set the welding gun to an operating temperature appropriate for the plastic type. See Plastic codes, temperature
and welding wire.
3. Position the component and tack it in place.
4. Weld the component using welding wire.
5. Allow the weld to cool.