9-3 (9440) L4-2.0L Turbo (2007)
/l4-2.0l_turbo/Page-1128002.png)
1. Fit the chain:
^
Start to fit the water pump pinion.
^
The silver-coloured link (B) must be fitted to the exhaust side's balancer shaft sprocket.
^
The copper-coloured link must be fitted to the intake side balancer shaft sprocket (C)
^
The silver-coloured link must be fitted to crankshaft sprocket (D).
2. Fit the chain's guide rails (E). Use Thread locking adhesive, Loctite 242.
Tightening torque 10 Nm (7 ft. lbs.)
3. Fit the chain tensioner. Load the tensioner by pressing in the plunger and turning to the right. Then secure with tool 83 96 392 Lock pin. (A)
