9-3 (9440) L4-2.0L Turbo (2007)
/l4-2.0l_turbo/Page-2768006.png)
6. Fit the suspension arm to the steering swivel member with a new nut. Hold the bolt with a wrench so that the bolt does not rotate.
Tightening torque 50 Nm (37 ft. lbs.)
Warning
Press up the pin carefully.
The groove in the pin must be visible in the screw hole in the spindle housing.
If the rubber gaiter is pressed down, it will not seal properly to the swivel pin.
