9-3 (9440) L4-2.0L Turbo (2007)
/l4-2.0l_turbo/Page-2133001.png)
Differential Mount: Service and Repair
Rear Rubber Bushings In Rear Axle, Replacement
Rear rubber bushings in rear axle, replacement
To remove
1. Remove complete unit, differential clutch and limited slip differential.
2. Remove the rear subframe.
3. Grind two recesses in the subframe 15 mm wide as illustrated.
4. Clean the bushing's hole from paint and dirt before pressing out the bushing.
5. Fit tool (A) CH-49158-1 and tool (B) CH-49158-2 together with the hydraulic press tool.
