9-3 (9440) L4-2.0L Turbo (2007)
/l4-2.0l_turbo/Page-4887007.png)
16. Use a ratchet handle to wind the wire coiler so that the wire cuts through the bead of adhesive. If necessary, use the protective tool with suction
cup between the cutting wire and metal to prevent the wire cutting against the metal or headlining. Move the wire coiler successively to maintain a
suitable angle. An acute angle cuts better. If necessary, use the other wire coiler to help. If there is a risk of the wire breaking, stop winding for
10-15 seconds to allow the wire time to work through the adhesive.
