9-3 (9440) L4-2.0L Turbo (2.0 HOT) (2003)
Fault indicator
9.
Disconnect Genesis from the car after successful programming (the green lamp lights up).
10.
Disconnect the battery charger from the car and close the hood.
11.
Fit fuse 23 into the dashboard fuse box.
12.
Remove the key from the ignition.
13.
Lock the car from the outside. The car's windows, doors, hood and trunklid must be closed.
Note
The alarm is activated. Make sure that the alarm is not triggered.
If the alarm triggers, de-activate the alarm and continue from step 13.
14.
Wait for 2 minutes (the control modules read in new data).
15.
Unlock the car.
16.
Insert the key into the ignition and turn to ON.
17.
Check the functionality of the OnStar system in accordance with the following (17.a - 17.c):
17.a. Activate the audio system by pressing the ICM unit (infotainment system control panel) ON button. Verify radio sound in the speaker
system.
17.b. Dealer-stock cars:
Press the blue "OnStar Services button" to start the audible OnStar demo message. During the message, press the blue "OnStar Services
button " again to connect to the OnStar Call Center. Explain to the advisor that you are testing the OnStar software update, and ask the
advisor to verify the location of the car.
Cars returned by customers:
Press the blue "Onstar Services button" to connect to the OnStar Call Center. Explain to the advisor that you are testing the OnStar software