9-3 (9440) L4-2.0L Turbo (2.0 HOT) (2003)
Door Module: Specifications
Control Module, Driver's Door (702D)
Test Readings, Driver Door Module, (702D)
Scope
The following information contain directions and readings for testing signals and levels of the control module.
Remember
-
Observe the test criteria. Use common sense when assessing the test results.
-
Check first that the control module is receiving power and is grounded.
-
Then check all sensor inputs and signals from other systems.
-
Finally, check the control module outputs. Remember that the test readings are not a confirmation of whether the actuator is in working order.
-
If a test reading is incorrect, use the wiring diagram to locate the leads, connectors or components that need to be checked further.
-
Specified readings are for a calibrated Fluke 88/97.
-
Test readings %(+) and ms(+) indicate the signal pulse ratio and pulse width respectively. A scan tool with pulse ratio and pulse width
measurement must be used. The sign indicates positive trigger pulse, TRIG+.