9-3 (9440) L4-2.0L Turbo (2.0 HOT) (2003)
Thermostat: Service and Repair
Thermostat
To remove
Warning: Coolant is very hot and is exposed to high pressure. When the pressure cap is opened there is a great risk of getting burnt.
Observe great caution.
1. Remove the expansion tank cap.
2. Raise the car.
3. Remove the front spoiler shield.
4. Take a receptacle, open the drain cock and drain the cooling system.
5. Close the drain cock.
6. Fit the front spoiler shield.
7. Lower the car.
8. Detach the level sensor connector and the expansion tank from the mounting on the body and move aside.