9-3 (9440) L4-2.0L Turbo (2.0 HOT) (2003)
/l4-2.0l_turbo_(2.0_hot)/Page-961002.png)
2. Remove the nuts on the front exhaust pipe to the catalytic converter.
3. Remove the torque arm.
Fitting of left-hand torque arm
1. Fit the torque arm. Thread the bolts. Tighten the bolt in the gearbox bracket first.
Tightening torque 70 Nm + 90° (52 ft. lbs. + 90°)
