9-3 (9440) L4-2.0L Turbo (2.0 HOT) (2003)
/l4-2.0l_turbo_(2.0_hot)/Page-966005.png)
14. Lift out the radiator and remove the oil pressure sensor.
To Fit
1. Fit the oil pressure sensor.
2. Fit new O-rings onto the oil cooler.
3. Position the oil cooler. Fit the oil cooler bolts.
Note: Note the bolt locations.
Tightening torque 22 Nm (16 lbf ft)
4. Fit the hoses and clamps for the oil cooler (if secondary air injection pump) fit the pipe to the check valve.
