9-3 (9440) L4-2.0L Turbo (2.0 HOT) (2003)
Tire Pressure Sensor: Service and Repair
Tyre Removal With Tyre Pressure Sensor
Tyre with tyre pressure sensor
To remove
^
Fit the tyre with a tyre fitting machine.
Note: It is also important to follow the instructions for the tyre fitting machine.
^
Do not apply the tyre tool in an area ±10° from the valve.
^
Start the removal opposite the valve.
^
Remove the rear side first.
To fit
^ Fit the tyre with a tyre fitting machine.
Note: It is also important to follow the instructions for the tyre fitting machine.
^
Start the fitting approximately 20° after the valve.